Website no longer active. Please use our new website Tegiwa.com
Details
We have adopted and renewed very popular "Independent bead shape" 4G63 yet for RB26DETT which is still very active in the tuning market.
Feature
For the race the "Independent bead" is the main stream of the water holes or Head Bolt holes. So even if the firing gas is leaked because of big power setting or degradation, it will reduce the risk of overheat by making it water holes independent bead.
By redesigning the water holes area between Head Bolt holes and bore, it will protect head from water flow in because it will prevent the crack at the Head Bolt holes block.
We also have redesigned the stopper and bead which make less likely to leak.
Bench test vehicle was 660ps and actual drive test vehicle was 600ps and 80kgm torque at a circuit.
It comes with conventional products of exhaust manifold, intake manifold and metal gasket of throttle.
Remarks
We recommend to use with strengthen head bolt kit.
For φ86 & φ87 piston (Independent Water holes)
The Performance requirement from Head Gasket.
As the cylinder block and head are not rigid body, when the Head Bolts are tightened, the gap between the surfaces and the surface pressure applied is not even across the whole surface. Moreover, due to combustion pressure and vibration while driving, the conditions are continually changing and the contact surface is being continually beaten. As a result, a good gasket must ensure that contact surface pressure is spread as evenly as possible and also adapt quickly to the ever changing gaps that can appear in the contact surface to maintain a good seal with good pressure.
STOPPER TYPE HEAD GASKET
A high pressure seal is formed around the combustion chamber through the use of stoppers which create a step within the gasket for optimum sealing. By making the stopper part of the plate also allows the fold to be smaller while maintaining structural integrity. One side of the plate is completely flat meaning that it can be layered with the stopper to allow stoppers to be used in even the tightest of locations around the combustion chamber forming a high quality seal. Compared with other gaskets of the same thickness, there are more layers in these gaskets giving flexibility which allows the gasket to maintain a good seal even when the engine tries to vibrate and move.
Feature
For the race the "Independent bead" is the main stream of the water holes or Head Bolt holes. So even if the firing gas is leaked because of big power setting or degradation, it will reduce the risk of overheat by making it water holes independent bead.
By redesigning the water holes area between Head Bolt holes and bore, it will protect head from water flow in because it will prevent the crack at the Head Bolt holes block.
We also have redesigned the stopper and bead which make less likely to leak.
Bench test vehicle was 660ps and actual drive test vehicle was 600ps and 80kgm torque at a circuit.
It comes with conventional products of exhaust manifold, intake manifold and metal gasket of throttle.
Remarks
We recommend to use with strengthen head bolt kit.
For φ86 & φ87 piston (Independent Water holes)
The Performance requirement from Head Gasket.
As the cylinder block and head are not rigid body, when the Head Bolts are tightened, the gap between the surfaces and the surface pressure applied is not even across the whole surface. Moreover, due to combustion pressure and vibration while driving, the conditions are continually changing and the contact surface is being continually beaten. As a result, a good gasket must ensure that contact surface pressure is spread as evenly as possible and also adapt quickly to the ever changing gaps that can appear in the contact surface to maintain a good seal with good pressure.
STOPPER TYPE HEAD GASKET
A high pressure seal is formed around the combustion chamber through the use of stoppers which create a step within the gasket for optimum sealing. By making the stopper part of the plate also allows the fold to be smaller while maintaining structural integrity. One side of the plate is completely flat meaning that it can be layered with the stopper to allow stoppers to be used in even the tightest of locations around the combustion chamber forming a high quality seal. Compared with other gaskets of the same thickness, there are more layers in these gaskets giving flexibility which allows the gasket to maintain a good seal even when the engine tries to vibrate and move.
Additional Information
| Manufacturer | HKS |
|---|---|
| Fitment | N/A |
| Color | N/A |
| Note | N/A |
- Be the first to review this product
Write Your Own Review
You may also be interested in
HKS Legamax Premium GRB/GRF EJ20 rear section only
£860.00 Excl. Tax £1,032.00 Incl. Tax
Contact Information
TEGIWA EURO
Tegiwa House, Sutherland Road,
Stoke-on-Trent. ST3 1HZPhone
01782 33 44 40Email
[email protected]Working Days/Hours
Mon - Fri / 9:00AM - 5:00PM
BE THE FIRST TO KNOW
Get all the latest information on Events, Sales and Offers.
Sign up for newsletter today.
TEGIWA EURO
OTHER LINKS
© Tegiwa Euro - Trading As Tegiwa Imports LTD | Registered in England Number 5798174
Tegiwa Imports Limited acts as a broker and offers credit from PayPal Credit and other providers. Subject to status, terms and conditions apply.
PayPal Credit is a trading name of PayPal (Europe) S.à.r.l. et Cie, S.C.A., 22-24 Boulevard Royal L-2449, Luxembourg.
Tegiwa Imports Limited acts as a broker and offers credit from PayPal Credit and other providers. Subject to status, terms and conditions apply.
PayPal Credit is a trading name of PayPal (Europe) S.à.r.l. et Cie, S.C.A., 22-24 Boulevard Royal L-2449, Luxembourg.